|
|
11-29-2014, 12:21 PM
|
#1
|
Location: Keswick, Ontario
|
Nova Prime WIP (Pic Heavy)
UPDATE IN POST 46 - FINISHED PAINTJOB
hey gang, been a while since I posted one of these! Anyway, if you read the title, you know what's coming.
Nova Prime is made from the Cybertron Optimus Prime mold, and I added extras on top to change the look somewhat. Oh and the wings are on Mixel joints if you were curious.
Still need to finish some things and refine some sanding.....got too cold to spray the primer so, I get extra time to make it look even better!
But now, the pics!
Vehicle mode;
Compared to another custom I'm making......
Robot mode:
Gotta find a way to sharpen the detail on the chest....looks too mushy :s
Oh and he has gatling gun shoulder straps.
Last edited by Malwave; 06-02-2015 at 06:39 PM.
|
|
|
11-29-2014, 12:32 PM
|
#2
|
Location: calgary alberta
|
Re: Nova Prime WIP (Pic Heavy)
looking sweet so far brent.
for the sharpening of the chest details,try an "olfa" blade/dremel/more sanding combo(manicure emery boards come in handy here,ranging in sizes from 1/8" thick up to 1 +1/2" width.).
i also have an extra of this mold which i planned to do the same bot out of but then i seen the maketoys version.
(i still want it but i'm iffy on the reviews about how fragile his wing/pack connector is)
also,if you can still do it without removing other mods,split his lower legs and "height booster/cannon mounts" in halves and fill them with hotglue and screws,adding more weight to his bottom half.this will make him less top heavy and enable you to be able to do even more mods/armor/details add-ons wihtout him always wanting to topple over backwards.
if the crotch is also accessible still,split that sucker open also and coat the inner gears with a thin coat of clearcoat nail polish.this will also help with his posablility once he has all the new added weight.
__________________
now open for commissions...big and small...minor and heavy,you dream it,i make it.
|
|
|
11-29-2014, 12:49 PM
|
#3
|
Location: Keswick, Ontario
|
Re: Nova Prime WIP (Pic Heavy)
Quote:
Originally Posted by chans formers
looking sweet so far brent.
for the sharpening of the chest details,try an "olfa" blade/dremel/more sanding combo(manicure emery boards come in handy here,ranging in sizes from 1/8" thick up to 1 +1/2" width.).
i also have an extra of this mold which i planned to do the same bot out of but then i seen the maketoys version.
(i still want it but i'm iffy on the reviews about how fragile his wing/pack connector is)
also,if you can still do it without removing other mods,split his lower legs and "height booster/cannon mounts" in halves and fill them with hotglue and screws,adding more weight to his bottom half.this will make him less top heavy and enable you to be able to do even more mods/armor/details add-ons wihtout him always wanting to topple over backwards.
if the crotch is also accessible still,split that sucker open also and coat the inner gears with a thin coat of clearcoat nail polish.this will also help with his posablility once he has all the new added weight.
|
I like it I'm just thinking of what I COULD do....I don't want it to look too busy know what I'm saying?
|
|
|
11-29-2014, 07:12 PM
|
#4
|
|
Re: Nova Prime WIP (Pic Heavy)
Wow, wow, wow....you've been busy...
|
|
|
11-29-2014, 08:45 PM
|
#5
|
Location: Keswick, Ontario
|
Re: Nova Prime WIP (Pic Heavy)
Quote:
Originally Posted by Echotransformer
Wow, wow, wow....you've been busy...
|
this is one of those ideas I've wanted to act on for years :P I had to act on it.
also general note...ignore the badly painted base coat. Come the next toy show I'm finding a junker to replace all the leg and arm bits to get a second crack at priming it CORRECTLY. Just looks like crap atm
|
|
|
11-29-2014, 10:49 PM
|
#6
|
Location: Locked in a basement full of Toys
|
Re: Nova Prime WIP (Pic Heavy)
Looks great so far Brent !! Like what you've done.
|
|
|
11-29-2014, 11:00 PM
|
#8
|
Location: Keswick, Ontario
|
Re: Nova Prime WIP (Pic Heavy)
Quote:
Originally Posted by Dragon Knight
Got enough guns on him Mal?
|
nope
|
|
|
11-29-2014, 11:09 PM
|
#9
|
Location: Locked in a basement full of Toys
|
Re: Nova Prime WIP (Pic Heavy)
Quote:
Originally Posted by Malwave
this is one of those ideas I've wanted to act on for years :P I had to act on it.
also general note...ignore the badly painted base coat. Come the next toy show I'm finding a junker to replace all the leg and arm bits to get a second crack at priming it CORRECTLY. Just looks like crap atm
|
I saw one at our VV out here, might cost to much to mail him though
|
|
|
12-09-2014, 01:59 PM
|
#10
|
Location: Keswick, Ontario
|
Re: Nova Prime WIP (Pic Heavy)
December 9th, 2014;
so I decided to add some details to the rear of the trailer so they don't too bland....here's what I got so far!
This part will normally be BEHIND the wings but hey....can't forget that either now can I?
Decided the base of the wings looked too bland so I went with this layered look....still waiting on some extras for it though
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Donate to Cybertron.ca |
Donations keep this site running, thanks for your support. More details here.
|
|